American Dynamics ADCC1100 User Manual download pdf (Page 5)

MEGAPOWER 3200 EXTENDED DOME/PTZ CAMERA PROTOCOL 8200-0421-23, REV. A

USER GUIDE

3 of 25

Figure 3. Populated Protocol Handler Form

5. When you have added all the XML protocol

configuration files that you want, click Close

Protocol Handler Form. The Direct

Dome/PTZ Connections screen reappears.

Note: To delete a listed file, highlight the

appropriate file, and click Delete Selected

Protocol Handlers. This action only removes

the file from the list and the MPCPU

configuration data file; it does not delete the

XML file from the PC disk drive.

Configuring Camera Protocol

Handlers

To configure the camera control handlers, do the

following:

1. In the RS-422/485 1 section and/or

RS-422/485 2 section, choose RS-422/RS-485

or RS-232, depending on the camera physical

connections type, from the dropdown menu in

the Dome/PTZ Control field.

Note: The 1 and 2 at the end of a section

name indicates port 1 and port 2 respectively.

2. In the RS-422/485 1 (and 2) sections, click the

Protocol Handlers field, and a dropdown menu

appears.

Figure 4. RS-422/485 dropdown menu choices

3. Highlight the appropriate protocol handler for

the cameras that you want to use. Another

dropdown menu appears that allows you to

choose the data rate.

Figure 5. Protocol handler baud rate dropdown

4. Click on the appropriate baud rate, and the

baud rate changes in the Protocol Handlers

field. The baud rates available for a protocol

handler are displayed for selection when the

mouse cursor is positioned over the Protocol

Handler field.

Note: If the same protocol handler file is used

for both sections 1 and 2, they must be set to

the same data rate. A second data rate can be

obtained by copying, renaming, and installing

the file.

5. Choose the appropriate values for the other

fields in each section:

 Starting Video Input No.

 Starting Dome/PTZ Address

 No. of Dome/PTZ Devices

6. Save your new configuration before continuing.

Installing and Operating

For specific installation and operation information

on extended dome/PTZ protocols for the MP3200

system, refer to the respective camera protocol

appendix.

The extended dome/PTZ camera protocols use

only one-way (simplex) communications to the

dome/PTZ camera; therefore data return lines are

not required. However, only American Dynamics

dome/PTZ camera devices connected with

American Dynamics RS-422/-485 control with

return data or SensorNet can provide the following

features:

 Camera Status screen information in these

columns:

 Dome/PTZ On-Line

 Mnemonic

1 2 3 4 5 6 7 8 9 10 ... 28 29

Comments to this Manuals

No comments

American Dynamics ADCC1100 User Manual Page 5

Comments to this Manuals

Related products and manuals for Digital pianos American Dynamics ADCC1100