American Dynamics ControlCenter 1100 User Manual download pdf (Page 3)

(1) Supported by SpeedDome Ultra VII or SpeedDome Ultra 8.

(2) Some digital video recorders, video servers, or similar products may lose color information when UTP cable distances exceed 180 m (600 ft).

Alarm Clearance Methods

• Acknowledge: Alarms must be manually acknowledged.

• Time Out:

Alarms are automatically cleared after a

pre-defined dwell time of 2 to 99 seconds. Alarms can also

be manually acknowledged.

• Transparent:

Alarms are cleared after the alarm contact

returns to its neutral state. If the contact returns to this state

before the transparent dwell time of 2 to 99 seconds, then

the alarm remains active for that predefined period. Alarms

can also be manually acknowledged.

Events

An event is a message that is passed from one matrix to

itself or other matrix systems (up to 3 on an ADnet network).

Up to 255 events can be defined and each system can have

a predefined event response. In addition, events can be

generated from any ControlCenter 200 or 300 keyboard to

produce a system response.

System Partitioning

Defining authorized access to keyboards, video inputs and

video outputs further enhances system flexibility. System

partitioning includes the following:

• Keyboard-to-Monitor Access: Restricts selected

keyboards from accessing selected video outputs.

• Keyboard-to-Camera Access:

Restricts selected

keyboards from calling or controlling selected video inputs.

• Keyboard-to-Camera Control Access:

Allows selected

keyboards to view certain cameras but restricts those

keyboards from controlling the cameras.

Keyboard Priority Operation

Keyboards can be assigned one of 8 levels of priority control

of remote camera sites. Level 1 has highest priority for

control of cameras. Up to 4 keyboards may simultaneously

control PTZ devices.

Model Numbers

ADMPLT16 . . . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,

(120/230 VAC, NTSC/PAL)

ADMPLT16C2 . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,

(120/230 VAC, NTSC/PAL) with

ControlCenter 200 keyboard

ADMPLT16C3 . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,

(120/230 VAC, NTSC/PAL) with

ControlCenter 300 keyboard

ADMPLT32 . . . . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,

(120/230 VAC, NTSC/PAL)

ADMPLT32C2. . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,

(120/230 VAC, NTSC/PAL) with

ControlCenter 200 keyboard

ADMPLT32C3. . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,

(120/230 VAC, NTSC/PAL) with

ControlCenter 300 keyboard

DirectSet

Allows the operator to quickly access and change dome

camera settings either via an on-screen selection or simple

keyboard command, without the need to access the dome

menus. Features like wide dynamic range, day/night and

dome information screens can be easily accessed without

compromising other dome settings.

Dome Ping

This utility allows the administrator to verify the integrity of

the communication between the matrix and the dome on

both SensorNet and the AD-UTC protocol.

Internal Video Loss Detection

Video loss detection is standard on all video inputs. If such

a camera is selected, a red screen will appear with a “Video

Loss Camera” message.

On-Board Diagnostics

Built-in diagnostics allow the user to determine the status of

the system’s internal components. LEDs on the front of the

unit clearly indicate power status and system health.

Optional Accessories

Accessory Description

ADCC0200,

ADCC0300

ControlCenter

Keyboards

Full system keyboards allow for video switching,

pan/tilt control, dome control, auxiliary control,

recorder control, multiplexer control and system

programming. The keyboards support bi-directional

communication with the matrix via ADnet.

ADCC1100

MegaPower

ControlCenter

Keyboard

Full system, smart card enabled keyboards allow

for video switching, pan/tilt control, dome control,

auxiliary control, macro control, user partitioning and

access, recorder control and system programming.

The keyboards support bi-directional communication

with the CPU via RS-232 ASCII commands.

ADTTE Touch Tracker

Keyboard

Full system keyboards allow for video switching, pan/

tilt control, dome control, auxiliary control and system

programming. The keyboards support bi-directional

communication with the CPU via RS-232 ASCII.

AD2088 and AD2089

Keyboards

Full system keyboards allow for video switching, pan/

tilt control, dome control, auxiliary control, macro

control, recorder control, and system programming.

The keyboards support bi-directional communication

with the CPU via RS-232 ASCII commands.

AD2081, AD2081-1

Port Expander

Expands one RS-232 port on a system into 4 ports.

This provides connections to multiple system

keyboards.

RCSN422, SensorNet-

to-RS-422 Converter

Control of RS-422 domes using the RCSN422

SensorNet-to-RS-422 converter.

ADACTP01BNC

Twisted Pair Video

Adapter

A passive transmission device that transmits video

or video with Up-The-Cable (AD-UTC) dome control

signals over Unshielded Twisted Pair (UTP) cables,

point-to-point, for distances up to 300 m (1,000 ft)

These adapters use Category 2-6 twisted pair wires

to transmit the video and dome control signals

and do not require power.

VRCMKIT Cable

Brackets

Each kit contains 3 cable management brackets.

1 2 3 4

Comments to this Manuals

No comments

American Dynamics ControlCenter 1100 User Manual Page 3

Comments to this Manuals

Related products and manuals for Digital pianos American Dynamics ControlCenter 1100