American Dynamics ADCC0300 Specifications download pdf (Page 39)

Keyboard Installation and Operation

To exit a dome camera menu:

1. Use the joystick to select QUIT WITHOUT SAVING - this will exit the dome menu

without saving any changes.

2. Use the joystick to select EXIT AND SAVE CHANGES - this will save any

changes and exit the dome menu.

Setting Presets

Dome, and pan/tilt cameras can be programmed with one or more preset shots.

To program a preset:

1. Call the desired camera to a monitor.

2. Maneuver the camera as required using the keyboard's joystick.

3. Press the FUNCTION (

) key.

4. Enter a number for the preset using the numeric keys.

5. Press the PRESET ( ) key.

Programming Dome Patterns

Up to three patterns may be programmed for each programmable dome camera. A pattern

is a predefined sequence of dome movements. The three patterns for a dome can

collectively consist of up to 98 camera commands. A single pattern cannot have a duration

longer than 400 seconds.

Defining Patterns (RS485 only)

To program a pattern:

1. Call the desired dome to a monitor.

2. Maneuver the camera to the position where the pattern will start using the

keyboard's joystick.

3. Press the FUNCTION ( ) key.

4. Enter a number (1 - 3) for the pattern using the numeric keys.

5. Press the PATTERN ( ) key.

6. Maneuver the camera using the joystick to define the pattern.

7. When the pattern movements have been completed, enter the pattern number

using the numeric keys.

8. Press the FUNCTION ( ) key.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

No comments

American Dynamics ADCC0300 Specifications Page 39