American Dynamics RHODUL-03E Specifications

Browse online or download Specifications for Security camera accessories American Dynamics RHODUL-03E. American Dynamics RHODUL-03E Specifications User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
SpeedDome
®
Ultra
Vandal-Resistant
Outdoor Housing
RHODUL-03VR (Clear Bubble)
RHODUL-04VR (Smoked Bubble)
Installation and Service Guide
Note: This housing meets IP66/Nema 4 ratings
provided it is used with ROENDC Adapter Pipe and
one of the following mounts: RHOTR Over-the
Roof Mount, RHOSW Short Wall Mount, or
RHOLW Long Wall Mount.
Parts Supplied
Housing assembly 0101-0061-02
Bubble assembly 0404-0083-01/-02
Tamperproof drive 1400-0149-01
Install kit 0351-2183-05
Purchase or Supply Separately
Male BNC connector
Tools Required
6.6mm (1/4in) fixed-handle
nut driver for Torx bit
Wire cutters and strippers
2.5mm (0.1in) slotted screwdriver
© Sensormatic 2004
Contents
Contents.........................................................................1
About this Guide.............................................................1
About the Outdoor Housing............................................1
Warnings and Cautions..................................................2
Warnings ....................................................................2
Cautions .....................................................................2
Procedure ......................................................................4
Unterminating the Housing .........................................4
Attaching the Housing to the Mounting Structure .......5
Attaching the Camera Dome to the Housing ..............7
Attaching the Bubble Assembly to the Housing..........8
Parts List for Authorized Users.......................................9
Specifications...............................................................10
Declarations .................................................................11
Appendix A: Cable Requirements ...............................12
Appendix B: Troubleshooting .......................................12
About this Guide
Cable
Connectors
This guide assumes that the outdoor mounting
structure to which the housing is attached is in
place and that data and power cables have been
pulled to the installation site. For how to install the
outdoor mounting structure, see documents
shipped with the structure.
Housing
Assembly
About the Outdoor Housing
The vandal-resistant outdoor housing has an
aluminum sunshield cover, a high impact bubble,
and a stainless steel bubble cage that protect the
SpeedDome Ultra camera dome. Tamperproof
screws affix the bubble to the housing.
Bubble
A
ssembly
The housing is temperature controlled and
weatherproof. A built-in thermostat and heater
prevent ice from forming on the outside of the
bubble.
An environmental version of the SpeedDome Ultra
I/O board is used. Simply connect video, power,
and data, to the cable connectors and twist and
lock the dome in place. Diagnostic power and
communications LEDs ensure proper connection
and aid in troubleshooting.
Four alarm inputs and two relay outputs (one
normally open and one normally closed) are
provided. Surge protection is provided on all
external lines, including video.
RHODUL-03VR/-04VR SPEEDDOME ULTRA VANDAL-RESISTANT OUTDOOR HOUSING 8200-0184-11, REV. A
INSTALLATION AND SERVICE GUIDE
1 of 14
Page view 0
1 2 3 4 5 6 ... 13 14

Summary of Contents

Page 1 - Outdoor Housing

SpeedDome® Ultra Vandal-Resistant Outdoor Housing RHODUL-03VR (Clear Bubble) RHODUL-04VR (Smoked Bubble) Installation and Service Guide Note: This ho

Page 2 - Warnings and Cautions

Specifications Electrical (combined dome and housing) Input Voltage ...24 to 30Vac, 50/60 Hz UL Listed Class 2 Certified Limi

Page 3 - Preventing Condensation

Declarations Regulatory Compliance Emissions ... 47 CFR, Part 15, Class A ICES-003 EN55022 Class B EN61000-3-2 EN61000-3-3

Page 4 - Procedure

Appendix A: Cable Requirements Data Cable The table below shows requirements for SensorNet, RS422, and Manchester networks. For more information ab

Page 5 - Mounting Structure

3. Verify data is reaching the housing. SENSORNET or RS422: Press and hold switch SW2 on the environmental PC board and observe the yellow (comm.) L

Page 6 - Relay Outputs

Fans Do Not Turn Follow steps until the problem is corrected. See page 9 to order parts. 1. Determine if the camera dome is receiving power. Look fo

Page 7 - Attaching the Camera Dome to

Warnings and Cautions Please review the following warnings and cautions before you begin installation or service. Warnings WARNING! Always use proper

Page 8

Preventing Condensation Condensation may be eliminated by following instructions within this guide and observing the following cautions. CAUTION: Eve

Page 9 - Parts List for Authorized

Procedure Review the following procedure and prepare parts accordingly before installing the outdoor housing. This procedure involves: • Unterminati

Page 10 - Specifications

Attaching the Housing to the Mounting Structure WARNING! Turn power off at the source before beginning this procedure. If a “Street L” pipe or elbo

Page 11 - MDR 1/04

Alarm Alarm wires connect to pins 4 and 5 of the gray 5-pin connector. Pin Color Designation 4 N/A Alarm Return 5 N/A Alarm input (3.5mA sink) Conn

Page 12 - Troubleshooting

Attaching the Camera Dome to the Housing This procedure involves: • Removing BOTH slot covers from the camera dome • Setting the camera address •

Page 13

D. Connect the dome to the housing 1. Align the protrusion at the top of the dome with the “white line” on the environmental PC board (or with the p

Page 14 - Ice Forms On Bubble

Parts List for Authorized Users The following parts can only be ordered by authorized users. To become authorized, contact your sales representative.

Comments to this Manuals

No comments