American Dynamics ADCC1100 Specifications download pdf (Page 24)

MegaPower LT

DST (Daylight Saving Time)

The DST menu item is used to select BACK or FORWARD on the day prior to the time

change. The system will then put the clock back or forward by an hour the next time the

time reaches 2 a.m. After the time change has been made, the DST option then

automatically resets to NONE.

NOTE

The unit has a battery-backed clock that retains the correct time, date and all other

programmed data in the event of a loss of power.

Camera Menu

The Camera menu is used to:

• Give each camera input a title.

• Inputs can be enabled or disabled. Disabling the video input will disable camera

selection from a keyboard.

• Define the communication type that will be used with each input.

Configuring Camera Options

To configure camera options, follow the steps below:

1. In the Supervisor menu or Administrator menu, select the Camera Menu option.

2. In the Camera menu, move to the Input number option.

3. Using the number keys, enter the number of the video input to be edited.

4. Move to the Title option. Press enter key to to start editing camera title. Press enter

key when editing is complete.

5. Use the joystick to amend the title. To do this, select the character to be edited using

left/right joystick commands and edit the selected character using up/down joystick

commands. Use the SHIFT (

) key in conjunction with up/down joystick commands

to change between upper and lower case characters.

6. Move to the Input option.

7. Use the right joystick command to either Enable or Disable the camera video input.

2 Camera Menu

Input number C1

Title

CAMERA 01

Input :ENABLE

Communication :UTC

Physical address :891

Channel :A

Return to Menu

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

No comments

American Dynamics ADCC1100 Specifications Page 24