American Dynamics ADCC1100 Specifications download pdf (Page 26)

MegaPower LT

Changing Pin Numbers

The Change Pins screen is used to change administrator and supervisor pin numbers.

To change a pin number, follow the steps below:

1. In the System menu, select the Change Pins option.

2. In the Change Pins screen, select either the Change Supervisor or Change

Administr option depending on which pin number is to be changed. The relevant

screen is displayed.

3. In the Current Pin field, enter the pin number that is currently used to gain access to

the menu system. The cursor automatically moves to the New Pin field.

4. Enter the new four-digit pin number. The cursor automatically moves to the

Verification field.

5. Re-enter the new pin number.

At this point, if all fields have been completed correctly, the pin number will be changed.

If an incorrect pin number has been entered at any point during the procedure (e.g.,

either the current pin number has been entered incorrectly or the entries in the New

Pin and Verification fields do not match), or if the user does not have the necessary

access privileges, an error message is displayed. At this point, the user will have to

press the ENTER key to return to the Change Pins screen.

NOTES

• It is strongly advised that the factory set default pin numbers are changed as soon

as possible in order to maintain system security. The default Installer pin number is

1776. The default Supervisor pin number is 0000.

• The Administrator can change both the Administrator pin number and the Supervisor

pin number. The Supervisor can only change the supervisor pin number.

• If a password is lost, a recovery system is available. See Password Recovery on

page 40.

3.1 Change Pins

3.1.1 Change Supervisor

3.1.2 Change Administr

Return to System Menu

3.1.1 Change Supervisor

Current Pin ****

New Pin ****

Verification ****

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 83 84

No comments

American Dynamics ADCC1100 Specifications Page 26