American Dynamics illustra 400 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
VideoEdge NVR 4.1 Release Notes
11
8200-2735-07 D0
Known Limitations and Issues
Video Loss on NVR
Expectations for video loss are dependent on two conditions:
The throughput of the source device (e.g. If a camera is only outputting 20 fps, then we
cannot expect the NVR to receive 30 fps).
Network topology (e.g. The capabilities of routing appliances vary and may introduce an I/O
buffering issue that would cause the loss of video packets).
Camera List with Audio and/or Dry Contact Properties
In the victor Client, it may take considerable longer time to get the camera list from a NVR that
has devices with audio and/or dry contacts setting enabled versus a NVR that has devices with
audio and/or dry contacts disabled.
Camera Support
The NVR is shipped with the following camera handlers:
American Dynamics 8 Channel IP Encoder Handler
American Dynamics Fixed IP Camera Handler
American Dynamics Illustra 400 Camera Handler
American Dynamics IP Speed Dome Handler
Arecont Vision Camera Handler
Axis Camera Handler
Panasonic Camera Handler
Sony Camera Handler
Please refer to the Appendices section of this document for the specific details for each camera
handler.
Note: Additional camera handles are available from the camera handler packs available on the
American Dynamics website.
MegaPixel Camera Support
When configuring megapixel cameras (e.g. especially Arecont 5.1 and 8 MP Cameras):
H.264 codec
Maximum resolution
Video frame rate less than 5
The live view via the NVR web client (QuickTime) will result in either green screen instead of true
video or distorted video. Live view through the victor Client will occasionally freeze the display.
Viewing through a WAN connection works ok.
The NVR Server V4.1 only supports full field of view (FOV) resolutions and a resolution ≤ 2040 in
width and/or height. Thus, cameras such as the Arecont Vision AV3015M or AV3155M, which
have two 2 FOV resolutions, will only have available one resolution (e.g. 1024x768).
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comments to this Manuals

No comments