Illustra Flex Series Release Notes
Known Limitations and Issues
The table below highlights known limitations or issues against the Illustra Flex cameras.
The Illustra Flex Camera Series does not support
Upgrades/Downgrades via Illustra Connect Tool.
Users can Upgrade via the
Camera Web GUI.
Incorrect IP address information in the product documentation.
It has been observed that the product documentation (User Guides and
the Quick Start Guides) contain the incorrect information regarding the
default IP address The correct information is as follows:
Default IP address: 192.168.1.168
Incorrect Username/Password information in the product
documentation.
It has been observed that the product documentation (User Guides and
the Quick Start Guides) contain the incorrect information regarding the
default password.
Default Username/Password: admin/admin
When the slow shutter is not set to ‘Off’ the 1MP & 3MP cameras’ FPS
will fluctuate between 15-30 FPS. This is for all values under slow
shutter.
Set slow shutter to ‘Off’ to
maintain a stable FPS.
To enable Alarm Out, Alarm in must also be enabled.
For alarm-out to be triggered,
alarm-in must be enabled.
The Live View Section of the User Manual refers to a Start/Stop manual
record video button for all Illustra Flex Cameras. However the
Start/Stop button is only present and supported on the Illustra Flex
Wireless Cube.
The button is only present and
supported on the Illustra Flex
Wireless Cube.
The user manual informs the user to click the ‘Save’ button in order to
save the settings. However the settings are saved automatically (unless
specified to click the “Save” button.
This is a cosmetic issue and the camera web GUI is correct.
Settings are saved automatically
unless specified to click the
“Save” button.
Comments to this Manuals