American Dynamics Illustra Flex Series User's Guide

Illustra Flex Series 1MP & 3MP Bullet User Guide 8200-1027-05 B0

Illustra Flex 1MP & 3MP Bullet 10 2.2.2 Mounting the camera 1. Affix the mounting template to the desired location, knock in 6 plastic anchors

Illustra Flex 1MP & 3MP Bullet 11 2.2.3 Connecting the Wires 1. To attach the camera to the fixed place. FIGURE 2-3: CONNECTING THE WIRES 2.

Illustra Flex 1MP & 3MP Bullet 12 2.2.4 Adjusting the Camera Position 1. Use the cross screwdriver loosen the cross screw on one side of the mo

Illustra Flex 1MP & 3MP Bullet 13 2.2.6 Adjusting the Sun shield hood Move the sunshield hood forward and backward to adjust the position of sun

Illustra Flex 1MP & 3MP Bullet 14 2.2.8 System Requirements Below table lists the minimum requirement to implement and operate a unit of an Illu

Illustra Flex 1MP & 3MP Bullet 15 2.3 Connection 2.3.1 Default IP address Since this is a network-based unit, an IP address must be assigned at

Illustra Flex 1MP & 3MP Bullet 16 2.3.2.2 Viewing Preparation Images of the unit can be viewed through Microsoft Internet Explorer 8 or above. B

Illustra Flex 1MP & 3MP Bullet 17  Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows: 【Download signed ActiveX

Illustra Flex 1MP & 3MP Bullet 18 【Run ActiveX controls and plug-ins】 Enable 【Script ActiveX controls marked safe for scripting*】 Enable FI

Illustra Flex 1MP & 3MP Bullet 19 3. Administration and Configuration 3.1 Live View Simply click on Live View on the top left side of the browse

Illustra Flex 1MP & 3MP Bullet 2 Notice Please read this manual thoroughly and save it for future use before attempting to connect or operate th

Illustra Flex 1MP & 3MP Bullet 20 3.2 Configuration When clicking “Configuration”, a window will be pop out for configuring “Image Parameters”,

Illustra Flex 1MP & 3MP Bullet 21 3.2.1.1 Codec FIGURE 3-4: BASIC SETTINGS - CODEC

Illustra Flex 1MP & 3MP Bullet 22 Edit Profile This unit offers two choices of video codecs for real-time viewing: H.264 or M-JPEG. Click codec

Illustra Flex 1MP & 3MP Bullet 23 (ADCI600F-B521) Item Option Description Video Codec M-JPEG/H.264 Set a default codec Resolution 720P(1280

Illustra Flex 1MP & 3MP Bullet 24 TABLE 3-2: CORRELATIONS OF RESOLUTION/STREAMS/FPS/CODES 1/2 (ADCI800F-B521) Resolution Single stream Double

Illustra Flex 1MP & 3MP Bullet 25 TABLE 3-3: CORRELATIONS OF RESOLUTION/STREAMS/FPS/CODES 2/2 Resolution Single stream Double stream Triple s

Illustra Flex 1MP & 3MP Bullet 26 (ADCI600F-B521) Resolution Single Stream Dual Stream Triple Stream 1280x720 1280x720 @ 30fps (H.264/MJPEG)

Illustra Flex 1MP & 3MP Bullet 27 3.2.1.2 Exposure FIGURE 3-5: BASIC SETTINGS – EXPOSURE Automatic Exposure FIGURE 3-6: AUTOMATIC EXPOSURE SE

Illustra Flex 1MP & 3MP Bullet 28 Slow Shutter Slow Shutter can be enabled if the sensitivity is still not good enough under “High” gain conditi

Illustra Flex 1MP & 3MP Bullet 29 Manual Gain Set Manual Gain value from 0 to 36dB. This function applies to manual lens only. 36dB brightens th

Illustra Flex 1MP & 3MP Bullet 3 Table of Contents WARNING ...

Illustra Flex 1MP & 3MP Bullet 30 BLC (Backlight Compensation) FIGURE 3-15: BACKLIGHT COMPENSATION SETTING Set an area for Backlight Compensat

Illustra Flex 1MP & 3MP Bullet 31 3.2.1.3 White Balance FIGURE 3-18: WHITE BALANCE SETTING  White Balance controls color on the screen. Mode

Illustra Flex 1MP & 3MP Bullet 32 Brightness adjustment Set picture brightness from level -255 to 255. Selecting 255 provides brightest the im

Illustra Flex 1MP & 3MP Bullet 33 Note At max 8 masks can be set on the screen. Caution The privacy zone area is a factor increased by 16. That

Illustra Flex 1MP & 3MP Bullet 34 3.2.2 Network Settings Below explains how to configure a wired network connection for the unit. FIGURE 3-23:

Illustra Flex 1MP & 3MP Bullet 35 3.2.2.1 FTP In this page, users can activate a FTP Server to reach SD card for recordings.  Simply clic

Illustra Flex 1MP & 3MP Bullet 36 FIGURE 3-25: RTSP & AUTHENTICATION SETTINGS FIGURE 3-26: RTSP STREAM1 / STREAM2 / STREAM 3 SETTINGS  M

Illustra Flex 1MP & 3MP Bullet 37 FIGURE 3-27: SNMP SETTINGS 1/2  SNMP V1: Tick “ON” or “OFF” to enable or disable.  SNMP V2: Tick “ON” or

Illustra Flex 1MP & 3MP Bullet 38 3.2.3 System Settings 3.2.3.1 Date & Time Synchronization Mode Synchronization supports three different mo

Illustra Flex 1MP & 3MP Bullet 39 DST Time Zone: Select the time difference between Greenwich Mean Time and where the unit is located. Daylight

Illustra Flex 1MP & 3MP Bullet 4 WARNING  This unit operates at AC 24V/ PoE.  Installation and service should be performed only by qualified

Illustra Flex 1MP & 3MP Bullet 40 3.2.3.3 Audio Audio setting can be setup by enabling audio input and output. Audio Input Type: Select one of

Illustra Flex 1MP & 3MP Bullet 41 3.2.3.4 Firmware System Information about Firmware Version, Mac Address, MCU Version, and Model Name are revea

Illustra Flex 1MP & 3MP Bullet 42 3.2.3.5 Configuration Video Type Select “NTSC” or “PAL” as required. Flickering by fluorescent light can be re

Illustra Flex 1MP & 3MP Bullet 43 3.2.4 Event Settings 3.2.4.1 Motion Detection This function is designed to record video once the unit detects

Illustra Flex 1MP & 3MP Bullet 44 3.2.4.2 Alarm When an alarm is connected, the unit triggers an alarm only once the status (open or closed) cha

Illustra Flex 1MP & 3MP Bullet 45 3.2.5 Record Settings 3.2.5.1 FTP Record Recording Condition Users can save image files via FTP by setting FTP

Illustra Flex 1MP & 3MP Bullet 46 Scheduled Recording Table Determine the recording condition: OFF, All Day, Schedule 1, or Schedule 2 from sche

Illustra Flex 1MP & 3MP Bullet 47 Alarm Settings & Motion Settings This function is to define the way to record video once a motion/alarm ev

Illustra Flex 1MP & 3MP Bullet 48  Appendix: Specification of Illustra Flex Bullet Model Type ICR Day/Night IR Bullet Camera Model No. ADCi8

Illustra Flex 1MP & 3MP Bullet 49 Applications SDK 2.0 ONVIF PASS ONVIF Compliance tool V12.06 Web Browsing Requirements Internet explorer 8.0 o

Illustra Flex 1MP & 3MP Bullet 5 Preface This user manual is designed as a reference for the installation and manipulations of the unit includin

Illustra Flex 1MP & 3MP Bullet 6 1. Product Overview 1.1 Physical Characteristics FIGURE 1-1: PHYSICAL DIMENSIO

Illustra Flex 1MP & 3MP Bullet 7 TABLE 1-1: PICTORIAL INDEX DEFINITION Index # Name Description 1 I/O Connector To connect Input/ Output device

Illustra Flex 1MP & 3MP Bullet 8 TABLE 1-3: PIN DEFINITIONS 2/2 Default Return to factory default by press button for 5 seconds Reset System re

Illustra Flex 1MP & 3MP Bullet 9 2. Installation and Connection 2.1 Unpack Everything Check everything in the packing box matches to the order f