American Dynamics AD2150 User Manual download pdf (Page 10)

Burle Allegiant System

10 CCTV Interfaces

³ To install Secure Perfect - Burle Allegiant:

1. You MUST be logged into the Secure Perfect computer as

secure. If not, log out and log

back in.

Note: The client on which you are installing Secure Perfect must be able to communicate on

the network with the Secure Perfect Server computer.

2. Click Start, then

Run.

3. From the

Run window, click Browse.

4. In the ‘

Look in’ field, select the hard drive on which Secure Perfect is loaded, such as (C:).

Then, navigate to the directory in which Secure Perfect is installed. The default is Program

Files\GE Interlogix\Secure Perfect.

5. Select the

CCTVInstall.exe.

6. Click Open.

7. In the Run window, click OK.

8. Provide the appropriate answers to prompts and click Next to continue.

During installation, you are prompted with a few questions.

• Type of CCTV Interface

Select Burle Allegiant.

• Description or name for the interface

Enter a description for this interface, such as Main Building CCTV.

Note: If multiple same-type CCTV interfaces will be installed on a single Secure

Perfect network, the description of each interface MUST be unique.

• COM port to which this interface is connected

Select the COM port.

• COM port for video loss signal

OPTIONAL: Select a COM port to use as a second connection for the interface. Click

Next.

9. Click Install to complete the installation. You will need to stop and restart the Secure Perfect

server for these changes to take effect.

10. Once the installation is complete, from the

Control Panel, select System, Hardware tab,

Device Manager, and then Ports. Select the COM port you previously selected in the

installation and provide identical settings for baud rate, data bits, parity, stop bits, and flow

control as your CCTV Controller setup.

11. When you are ready to launch the CCTV program, you will need to restart the Secure Perfect

services on this client.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

No comments

American Dynamics AD2150 User Manual Page 10