American Dynamics AD2150 User Manual download pdf (Page 2)

American Dynamics System

2 CCTV Interfaces

American Dynamics System

The Secure Perfect - American Dynamics Interface supports the American Dynamics controller.

The Secure Perfect - American Dynamics Interface provides the capability to automatically

control American Dynamics CCTV cameras and to monitor remotely when Secure Perfect

alarms change state. To be able to monitor the alarms, the desired Secure Perfect alarms must be

linked or “mapped” to the appropriate CCTV cameras set up in American Dynamics. When

Secure Perfect receives the mapped alarm, Secure Perfect sends a message to the American

Dynamics system to turn on the linked CCTV camera(s) and monitor(s). The American

Dynamics system will then control the appropriate camera(s) and monitor(s). No operator

intervention is required. As an alarm is cleared by the operator from the Secure Perfect

Alarm

Monitor

form, or when the Secure Perfect alarm resets, the American Dynamics system will be

informed that the alarm is now reset and responded to and the appropriate camera will turn off.

Setup Overview

³ To perform a successful configuration, follow these steps:

1. Set up the Secure Perfect system and the American Dynamics system or verify the setup if

this is an existing system. Figure 1 provides a basic example of the hardware setup. See

“Software Requirements” on page 1 and “Hardware Requirements” on page 3 for more

information.

2. Install the Secure Perfect - American Dynamics software on the desired Secure Perfect

computer. See “Installation: American Dynamics” on page 3.

3. Add CCTV alarms and then link or “map” the desired Secure Perfect alarms to the

appropriate CCTV cameras set up in American Dynamics. See “Configuring Alarms” on

page 5 and “Monitoring” on page 25.

4. Once the Secure Perfect and American Dynamics systems are set up and configured,

operation of the CCTV control feature will be a hands-free procedure.

Figure 1. Overview of the Secure Perfect and American Dynamics Interface

1 2 3 4 5 6 7 ... 25 26

No comments

American Dynamics AD2150 User Manual Page 2