American Dynamics RAS918LSP Specifications download pdf (Page 28)

SPEEDDOME ULTRA VII EIS DAY/NIGHT CAMERA DOME 8200-0184-14, REV. A

INSTALLATION AND SERVICE GUIDE

28 of 37

Removing the Slot Covers

1. Gently swivel eyeball to totally expose one of

two slot covers (

Figure 27).

CAUTION: Swiveling fast can damage gears.

2. Insert small, thin-bladed screwdriver into space

between cover and eyeball.

3. Gently pry off slot cover.

4. Gently swivel eyeball to totally expose

remaining slot cover. With other cover removed,

this cover can be easily removed.

Figure 27. Removing slot covers

Removing the Camera

1. Perform procedure "Removing the Slot Covers"

(page

28).

2. Remove ribbon cable from camera (

Figure 28).

Swivel camera yoke to expose camera

connector. Then, using a small slotted

screwdriver, 1) gently pry camera connector

loose from camera, and 2) pull it down through

cable tie wrap.

Figure 28. Removing the ribbon cable

3. Remove camera (

Figure 29).

1) Loosen the screw holding the camera tripod

mount and then 2) carefully lift the camera out.

Figure 29. Removing the camera

Reverse steps to reassemble. Ensure ribbon

cable pins are inserted "face down".

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 36 37

No comments

American Dynamics RAS918LSP Specifications Page 28