American Dynamics illustra 400 Specifications download pdf (Page 23)

Installation and Operation Guide

Figure 2.7 The PCB board

3 4 5

6 7 8 9 10

1. Plug Inlet: An AC 24V inlet that connects to an external power supply.

2. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps

Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the

same cable as used for the network connection.

3. Plug Inlet: A DC 12V inlet that connects to an external power supply.

4. GPIO: This is a 6-PIN connector including the Digital output/input, DC output and

GROUND items for connecting with external devices.

5. VIDEO OUT Connector: The connector provides the unit’s composite video signals to a

monitor. (This connector adjusts and improves the images.)

6. AUDIO IN: The connector is used to connect the audio output from other devices to the

camera.

7. USB port: The user can use a USB device cable to connect the IP camera to the USB port on

the PC.

8. AUDIO OUT: Provides the camera’s audio signal to a speaker or stereo.

9. SD/SDHC CARD slot: This is used for updating system software and archiving / accessing

critical images.

10. RESET: Recover to factory default. (Refer to section 2.5 The Reset Button.)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 105 106

No comments

American Dynamics illustra 400 Specifications Page 23