American Dynamics illustra 400 Specifications download pdf (Page 29)

Installation and Operation Guide

3. INSTALLATION

Please follow the instructions and the diagram below to set up the system.

NOTE: The IP camera is linked by its Video Out connection via a BNC connector to a

monitor's Video In connection. If this connection is there, you can see some

information on the monitor screen, such as the IP camera factory default Static IP

address (192.168.1.168). But the IP camera Static IP address can only appear if there

is a connection between the IP camera and another device. If there is no such

connection, the IP camera factory default Static IP address will not appear on the

monitor screen.

3.1 Hardware Installation

1. Plug in the power connection to the IP camera.

2. Plug in the IP camera cable.

3. Confirm the correct network connection status (PC/HUB/ IP camera).

4. In the PC IE Browser, key in the camera’s IP online to link up to the live first page.

NOTE: The red light power indicator on the IP Box Camera flashes when the power supply

is on.

Two-color network indicator:

1. It is off when the network is disconnected.

2. The green light goes on when the network is connected; the orange light flashes

indicate the network connection status.

3.2 Placing a Desiccant Pack Inside the Camera

The outdoor mini-dome/ bullet camera comes with a desiccant pack which is placed inside the

camera using a two-sided adhesive tape. The desiccant pack is for reducing the moisture and

humidity content inside the camera and prevents moisture from condensing on the lens or its cover.

If the user decides to remove the camera cover after more than a few months of camera use,

remove the used desiccant pack as well and place the replacement pack inside the camera.

1. Stick the piece of desiccant pack to the inner side of the camera.

2. Then use a two-sided adhesive tape to fix the desiccant pack.

3. Reattach the cover of the camera.

The Outdoor Mini-dome Camera:

The Bullet Camera:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 105 106

No comments

American Dynamics illustra 400 Specifications Page 29