American Dynamics illustra 400 Specifications download pdf (Page 87)

Installation and Operation Guide

5.1.3.8 PPPoE & DDNS

Using the PPPoE

1. Install the XDSL software (obtained from your ISP dealer) in your PC.

2. Search your IP camera's IP address: you can connect the IP camera and the Video monitor.

The monitor screen will show the IP address on its right side.

3. Turn off the DHCP function (of the IP camera) if it is “ON”.

NOTE: Turn up the “DIP SWITCH” from “3” to “4”, and change the relative network settings, the

IP Address, NetMask and Gateway on the image web page (for the ADCi400-X001 or

ADCi400-X002 only).

4. Installing an IP address in your PC or notebook.

Desktop Move the mouse focus to the Network neighborhood and click the right key of the

mouse Choose the properties Choose your local connection Choose the properties

and select the configuration Select the TCP / IP Choose the properties Enter the IP

address in a four-part formula, for example “192. 168. 1.101” (the first three parts must be

identical to the above numbers, only the last part can be changed to your own number, which

must never exceed 255) Click on the mask and the mask input, namely “255. 255. 255. 0” (a

fixed formula) Click “OK” Click “OK”.

5. Desktop Choose IE browser Enter the IP camera IP address in the URL (check step # 2

above) Enter IP camera images will appear.

PPPoE Settings

1. Enter the IP camera home page Choose the network Enter “User Name: admin” and

“Password: 9999” Click “OK’.

2. Choose PPPoE PPPoE mode: Select “ON” Enter “Account” Enter “Password”

Submit Unplug the power connection.

3. Plug in the IP camera and it will receive an IP address from the ISP dealer (this IP address is

dynamic --- every time you unplug and plug in again you’ll get a new IP address).

Test: Go to the Internet.

1. Set your PC to enter the Internet.

2. Desktop IE browser Enter the IP camera IP address (the same address as in the PPPoE

settings and step 3 above) You can see the IP camera images.

DDNS settings

(8) Check your IP camera’s IP address (monitor) open your IE browser Use the address to

connect to the IP camera or view the images Choose the network Enter “User name :

admin” and “Password : 9999” Click “OK” .

(9) Choose the “DDNS” Click “Enable DDNS” Enter the “DDNS host name”, for example

“abc123. homeip.net” Enter “DDNS Account”, for example “abc123” Enter the “DNS

Password”, for example “7777” Submit The settings are now complete Close the IE

browser.

(10) Open the IE browser again Enter the Website address you just applied for, such as

“abc123.homeip.net” You can look at your IP camera images right away. The procedure is

complete.

NOTE: These settings are only for your ADSL Dynamic IP configuration. If your

configuration is fixed (true IP), you don’t need to proceed with the PPPoE and DDNS

settings. The DDNS is just for your convenience.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 105 106

Comments to this Manuals

No comments

American Dynamics illustra 400 Specifications Page 87

Comments to this Manuals

Related products and manuals for Security cameras American Dynamics illustra 400