American Dynamics MegaPower 3200 Installation Guide Page 13
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
11 of 82
○ Dual MPCPU: Enter 100 for the selected
MegaPower CPU, or enter 101 for the
Standby MP CPU.
d. Press the Ack key located in the lower right
corner.
The System Menu appears on the LCD screen
(
Figure 12).
Note: To exit the LCD Menu Mode, press the
Menu key.
Figure 12. System Menu screen
3. Press Enter to choose Addressing. The Address
Menu screen appears.
Figure 13. Address Menu screen
4. Press Enter to choose IP Address. The IP
Address screen appears.
Figure 14. IP Address screen
5. Scroll down to Set IP Addr and press Enter. The
Set IP Address screen appears.
Figure 15. Set IP Address screen
6. Scroll down to DHCP and press Enter. The
DHCP Setting screen appears.
Figure 16. DHCP Setting screen
7. Press Enter to choose Enable.
8. Exit from the MegaPower CPU menu system.
Using a Static IP Address
To set up the MegaPower CPU for a static IP
address:
1. Connect a keyboard to an RS-232 port on the
MegaPower CPU. Ensure the baud rates match
for the keyboard and CPU port in use.
2. Use the following instructions to provide the key
sequences for each supported keyboard:
AD2088:
a. Place the keyboard in Menu Mode by turning
the keyswitch to MENU. The CAMERA LEDs
on the keyboard display P6.
b. Enter one of the following number sequences
for your MegaPower CPU installation:
○ Standalone MPCPU: Enter 100.
○ Dual MPCPU: Enter 100 for the selected
MegaPower CPU, or enter 101 for the
Standby MP CPU.
c. Press the ENTER key, which is located above
the joystick. “ENTER” is stenciled on the front
face of the key; the top of the key may be
labeled either PRESET or SHOT.
The CAMERA LEDs on the keyboard will only
display 7P if the selected CPU is accessed.
ADCC1100:
a. Place the keyboard in Program Mode by
pressing its softkey.
Note: To display and enter Program Mode, you
must insert a Smartcard that has administrator
privileges.
b. Press the Matrix Menus softkey.
c. Enter one of the following number sequences
for your MegaPower CPU installation:
○ Standalone MPCPU: Enter 100.
○ Dual MPCPU: Enter 100 for the selected
MegaPower CPU, or enter 101 for the
Standby MP CPU.
d. Press the Enter softkey.
ADCC0200/0300:
Notes: In RS–232 mode, the ADCC0200
keyboard does not have matrix menu access
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Related products and manuals for Processors American Dynamics MegaPower 3200
(38 pages)© 2020, manymanuals.com. All rights reserved. | 0.798 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals