American Dynamics MegaPower 3200 Installation Guide Page 42
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
40 of 82
Figure 80. Delete Rows dialog
4. Click Yes to delete the event timer definition or
No to close the dialog box without deleting the
definition.
Creating Alarm Monitor/
Contact Tables
Alarm Monitor/Contact Tables allow you to associate
alarm contacts with cameras or Salvos, Presets, and
auxiliaries. You can set the alarm dwell time,
auxiliary states, connections, and the locations of
each alarm contact.
Click on Alarms – Contact Definitions to begin. The
following screen appears (
Figure 81).
Figure 81. Alarms – contact definitions screen
To create Alarm Monitor/Contact Tables, complete
the following fields:
• Contact No. – Determined by the following:
MPCPU port designation Alarms (1-1024),
Alarms (1025-2048), Alarms (2049-3072), or
Alarms (3073-4096), and either:
− The physical contact point on the AD2096A
Alarm Interface Unit and the AD2096A DIP-
switch settings, or
− The dome address and the AD2083-xx RS-422
Distributor’s DIP-switch setting for the Number
of Alarm Contacts per Dome
• Camera or Salvo – Specifies the camera pseudo
number or Salvo to be called when the alarm
activates. If the Link field is set to Salvo or Salvo
Group Ack, the number in this field refers to the
Salvo number.
• Preset or Pattern – Indicates a Preset (0-96) or a
Pattern number (0-3) assigned to the camera
number or Salvo selected above. Enter the
number of a Preset or Pattern for the
corresponding camera number or Salvo field as
follows:
Figure 82. Contact Definitions Preset or Pattern
Dropdown List
− For a Preset number, enter a numeric value
into the Preset or Pattern field. Ensure there is
no prefix displayed as part of the numeric value
entered. If the “Pat” prefix is displayed, select
“General Preset Number” from the dropdown
list to remove it.
− For a Pattern number, enter a numeric value,
and then select “Pattern Specific Number” from
the dropdown list. The numeric value entered
will now contain a “Pat” prefix.
(See the MegaPower CPU Operator’s Guide,
8200-0421-02, for more information on
Presets.)
• Link – Allows linking of a contact definition to
another contact definition, salvo, or wired set of
alarm contacts. Linked options are:
– No - Indicates that the alarm contact entry
either is not linked with another alarm contact
or is the last entry of a linked group of alarm
contacts.
– Yes - Indicates that the alarm contact entry will
be linked to the next alarm contact entry
programmed into the system. A group of
contacts linked in this way emulates a system
Salvo (more than one camera action runs in
response to an alarm).
– Salvo - Indicates that the alarm contact entry
will call a Salvo to a block of monitors.
− Wired - Indicates that the alarm contact entry
will be linked to the following entry in a wired
set. A wired set is a set of alarm contacts.
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Related products and manuals for Processors American Dynamics MegaPower 3200
(38 pages)© 2020, manymanuals.com. All rights reserved. | 2.823 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals