American Dynamics MegaPower 3200 Installation Guide Page 29
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
27 of 82
The Error Log Status screen provides the following
information:
• MPCPU A / MPCPU B – Radio buttons that
enable you to select and view the error log for the
chosen MegaPower CPU.
• Fault – An abnormal condition detected by the
CPU. The system provides status on up to 12
faults.
• Count – Indicates the number of times the fault
has occurred.
• Error Code – Identifies the fault by number
(1,000–-9,999).
• Message – Provides a textual description of the
fault.
• Clear – Clears the error message from the error
log status screen and the CPU LCD screen. Click
to clear the error message.
Configuring the System
The System function allows you to select sites,
enable logon, determine the system date, and
configure ports for keyboards, video loss detection,
and other devices.
Click on the System links in the Explore menu to
begin.
Figure 58. System links
Setting System Options
The System Options function allows you to create
site numbers (1-30) and determine their date formats
and start dates. This function also allows you to
enable or disable the user logon.
Click on the System – Options link in the Explore
menu to begin. The following dialog box appears
(
Figure 59).
Figure 59. System – options dialog
The System – Options screen provides the following
options:
• Site Number – Allows you to create a numeric
identifier for the local site (1–30).
• Site Name – Allows you to create a name for the
local site. Site names can be any length.
• Users Enable Logon – Checkbox implements
password protection on system resources, such
as cameras and monitors, through keyboards.
− Unchecked: The Definitions – Keyboard/User
Priorities screen appears where you can set
keyboard priorities.
− Checked: The Definitions – Keyboard/User
Priorities screen appears where you can
create individual passcodes.
• Snapshot – Section that enables you to take and
store snapshots of the currently selected monitor
after you have installed a TFTP server
application.
− Installing a TFTP server:
A TFTP server application can be downloaded
from the Internet. After downloading the
application, install it on a PC in the same
Ethernet network as the CPUs according to
the instructions accompanying the application
or installation wizard. Then, configure the
application by specifying the TFTP root
directory where the Snapshot .jpg files will be
stored. Also, enter the range of permitted IP
addresses to match the IP addresses of the
CPUs in the system.
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Related products and manuals for Processors American Dynamics MegaPower 3200
(38 pages)© 2020, manymanuals.com. All rights reserved. | 2.019 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals