American Dynamics MegaPower 3200 Installation Guide Page 19
- Page / 86
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
MEGAPOWER CPU 8200-0421-03, REV. G
ADMINISTRATOR’S GUIDE
17 of 82
• Time Format – Select a Time Format by
clicking either Standard Format (12-hr., a.m.
and p.m. display) or Military Format (24-hr.
display).
• Default MPCPU IP Address –Set the default
IP address used for write/read operations if no
IP address is specified as CPU A and CPU B
in the System – Options screen.
• Default Config File Save and Backup Paths
used for File => Write
− Check To Enable Writing Config File By
Default in File => Write – When this
checkbox is checked, the File => Write
dialog Save To File checkbox also will be
checked when a Write operation is invoked.
− Default Config Save To Dir – Specify a
path to the default directory to which
configuration files will be saved when
invoking File => Write with a new MPCPU
configuration. Use the Browse button on
the right side of the path field to help define
the path.
− Check To Enable Writing Backup File By
Default in File => Write – When this
checkbox is checked, the File => Write
dialog Backup File checkbox also will be
checked when a Write operation is invoked.
− Default Backup Config File Dir – Specify a
path to the default directory to which backup
files will be archived when invoking File =>
Write. Use the Browse button on the right
side of the path field to help define the path.
3. Click OK to save your preferences or Cancel to
close the dialog box without saving your
preferences.
4. Close and restart EASY CPU for your change to
take effect. The Main Screen (
Figure 52 on
page
23) appears in the selected language.
Viewing Configuration File
Properties
To view the configuration file properties, do the
following:
1. Click File on the main screen.
2. Click Properties… in the dropdown menu bar.
The Config File Properties screen (
Figure 40)
displays information about the currently open
configuration file.
Note: If your configuration file was created prior
to EASY CPU Version 2.00, it is designated as a
Version 1.00 file and the Properties screen does
not contain any information other than the version
number and a note on how to convert a Version
1.00 file to a Version 2.00 file.
Figure 40. Configuration File Properties
3. Click OK to exit this screen.
Saving Data on the Hard Drive
EASY CPU allows you to save system configurations
on your hard drive. You can do this either before or
after transferring new configurations to the
MegaPower CPU. However, any configuration you
save to your hard drive must be transferred (written)
from the hard drive to the CPU before it will take
effect in the system.
To save configuration data on your hard drive:
1. Click File on the main screen.
2. Click Save in the dropdown menu bar if you are
planning to overwrite the existing file or Save As
if you are planning to create a new file.
3. If Save As, navigate through the Save As dialog
to a desired folder and enter a file name.
4. Click Save to save and close the file.
- MegaPower 1
- Contents 4
- MegaPower CPU Front Panel 6
- MegaPower System 7
- Compatible System Keyboards 8
- System Features 8
- Administrator Tasks 9
- Operator Tasks 9
- Initializing the System 10
- Ethernet Network Connection 11
- Network DHCP Server 12
- Using a Static IP Address 13
- Firewall Setup 14
- Read Cycle 14
- Installing EASY CPU 15
- ADMINISTRATOR’S GUIDE 16
- Starting EASY CPU 18
- Viewing Configuration File 19
- Properties 19
- Data in CPU 20
- New Configuration File 22
- Adding a User Login 23
- Logging in Users for CPU 24
- Read/Write Access 24
- EASY CPU Main Screen 25
- Overview 25
- Checking the System 26
- Camera Status 27
- Passive Hot Switch Status 27
- Error Log Status 28
- Configuring the System 29
- Setting System Date and Time 30
- Setting Port Configurations 32
- Configuring the Dome/PTZ 32
- Device Direct Connection 32
- Configuring Switching 34
- Creating Tours 36
- Event Timers 37
- Event Timer – Tours 38
- Configuring Alarms 39
- Contact Arming 41
- Creating Alarm Monitor/ 42
- Contact Tables 42
- Defining System 44
- Devices 44
- Adding Camera Definitions 45
- Adding and Deleting Calling 46
- Contacts to Cameras 46
- Associating Salvo Callups to 47
- Cameras 47
- Defining Keyboards 48
- Adding a Range of Monitors 49
- Configuring Keyboard/User 50
- Keyboards and Priorities 50
- Priority Settings 51
- Controlling Access with 52
- Partitions 52
- Editing Camera Definitions 54
- Changing Calling Contacts 54
- Associating Keyboards to 55
- Adding Keyboard Definitions 56
- Editing Keyboard Definitions 56
- Adding Cameras to Keyboards 56
- Monitors 57
- Adding Monitor Access to 58
- Keyboards 58
- Adding Monitors to Keyboards 58
- Satellites 59
- Associating Monitors to 61
- Adding Monitor Definitions 62
- Adding a Range of Cameras 63
- Performing a Ping Test 64
- Declarations 65
- 64 of 82 66
- 65 of 82 67
- LCD Menu Structure 69
- F1 Special Function Keys 71
- F2 Special Function Keys 71
- Tables on page 40 for 73
- Alarm Receipt 75
- Alarm Arming and Response 75
- Alarm Display Indicators 75
- Alarm Display Method 76
- Alarm Queuing Method 76
- Alarm Clearance Method 76
- Single Display, Hold Queuing 78
- Block Display, Hold Queuing 79
- Queuing 79
- Satellite Site Connections 82
- 81 of 82 83
- 82 of 82 84
- 8200-0421-03 G 86
Related products and manuals for Processors American Dynamics MegaPower 3200
(38 pages)© 2020, manymanuals.com. All rights reserved. | 2.614 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals