Devices
86 VideoEdge NVR 4.4 Installation and User Manual
Procedure 7-3
Manually Adding an IP Device
Step Action
1 Select the Devices menu.
2 Select List.
Th
e Video List opens.
3 Click Add New Device.
Figure 7-3 Add New Device Window
4 Enter the Device Name.
5 Enter the Internal IP Address of
the device.
6 Select the Pas
sword Group from the Password Group dropdown.
The Password Group will usually be default. The NVR will use the
manufacturer’s default password to connect to the camera. However, if you have
changed the password for this camera, you need to assign the camera to the
appropriate password group, or create a new password group. For further
information on password groups refer to Camera Password Groups on page 149.
7 Click Apply.
8 (Optional) De-select the Ad
d All Inputs on Device checkbox if you do not want to add all
inputs on a device.
9 (Optional) De-select the Default Associations checkbox
if you want to define custom
associations after the devices have been added.
10 Click Apply.
A w
indow opens displaying the available inputs. For video devices a snapshot can be
disp
layed.
The device is added to the Device List.
11 Conf
igure the device settings as required.
- End -
Comments to this Manuals