Network Settings
175
The field background changes to yellow indicating a change has been made.
4 Click
Save.
A confirmation message displays.
The default RSTP Port number is 554.
- End -
NTP Status and NTP Servers
The NVR can be used as a Network Time Protocol (NTP) Server to all reachable network devices.
In this configuration it will accept and respond to NTP requests from all accessible networks.
Setting the NVR to use NTP can affect the time and date settings of cameras and other devices
with access to the same networks as the server if you configure these devices to use the NVR as
an NTP server. The NTP server will not affect other Windows devices on the LAN with the NVR.
Alternatively you can use external NTP servers to synchronize date and time instead of using the
NVR as the NTP Server.
You should setup all NVRs and client systems to use the same NTP Server, to synchronize date
and time settings.
Procedure 16-4
Editing the NTP Status to use NVR as a NTP Server
Step Action
1 Select Network.
2 Select
General.
The General Network settings page opens.
3 T
o edit the NTP Status click either the Enable or Disable option buttons.
The area behind the option buttons changes to yellow indicating a change has been
ma
de.
4 Click
Save.
A confirmation message displays.
- End -
Comments to this Manuals