Video Intelligence
133
Procedure 10-4
Editing a Motion Detection Camera Alarm
Step Action
1 Select Cameras from the main menu.
2 Select Alarms.
Th
e Camera Alarm Configuration page opens (Figure 10-2).
3 Select Edit
for the camera alarm you want to edit.
4 Use the drawing tools to edit the selected alarm’s region of interest in the Camera Alarm
Configuration drawing window, refer to Table 9-2 Drawing Tools on page 120 for
information on how to use the drawing tools.
5 Edit the alarm’
s
parameters. These will be different for each type of Video Intelligence
alarm.
You cannot update the Name of the alarm. If you must change the alarm name,
you must create a new alarm with the new name, assign it the same parameters
and delete the old alarm.
6 Select Save.
- End -
Disabling Video Intelligence Camera Alarm
When a Video Intelligence camera alarm is not needed at present, but will be needed in the future,
the alarm can be disabled. The alarm configuration remains the same for when it is enabled again.
You can also edit the alarm configuration parameters while the alarm is disabled, once enabled the
changes will take effect.
Procedure 10-5
Disabling a Camera Alarm
Step Action
1 Select Cameras from the main menu.
2 Select Alarms.
Th
e Camera Alarm Configuration page opens (Figure 10-2).
Comments to this Manuals