American Dynamics VideoEdge User Manual download pdf (Page 49)

Installing the VideoEdge NVR

• IP Address Allocation

Note

To open the NVR Administration Interface the IP address of one of the NICs must

be known, if all the IP addresses are dynamic they will vary in value. It is

recommended that a NIC is configured with a static IP address and subnet mask

for this reason.

• LAN IP address

• Subnet Mask

Note

The Subnet Mask is defined by three classes of IP Address A, B and C which will

determine its value. They are as follows:

• Class A - First Octet Decimal Range 1-126, Subnet Mask Value 255.0.0.0

• Cla

ss B - First Octet Decimal Range 128-191, Subnet Mask Value 255.255.0.0

• Cla

ss C - First Octet Decimal Range 192-223, Subnet Mask Value

255.255.255.0

Class A addresses 127.0.0.0 to 12

7.255.255.255 cannot be used and are reserved for

loopback and diagnostic functions.

• IP broadcast (required)

2 Edit the settin

g as required and click Save.

3 Click

Continue to advance to the next page. Continue to Procedure 3-19 WAN Settings.

Note

For further information on LAN interface settings refer to Procedure 16-8 Editing

the LAN Interface Values on page 178.

- End -

DHCP Server Page (Optional)

The DHCP Server page is used to edit the DHCP server settings for each NIC including the DHCP

status, start range, end range, subnet and netmask. Each NIC can be used to host a DHCP server

for the LAN it is attached to.

If a NIC has been designated a Dy

namic IP address it will not be available for editing on this page.

The DHCP Status page allows you to view all a

ctive devices which have been assigned a dynamic

IP address by the NVR.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 49