Configuration Backup and Templates
230 VideoEdge NVR 4.4 Installation and User Manual
7 Enter a File name for the template and click Save.
A default template file name is given; this is made up of VideoEdgeNVRTemplate,
followed by the NVR name and the date and time the template was created.
Example:
VideoEdgeNVRTemplate-ServerN
ame-YYYY-MM-DDT00_00.xml
VideoEdgeNVRTemplate-linux-adnvr-2012-03-26T14_02.xml
- End -
Import a Template File
You can import NVR configuration settings saved as a template. When you are configuring a NVR
for the first time, you can load a saved template file, which will configure the NVR with the settings
in the file, refer to Procedure 3-15 Configuring the Setup Page on page 29. When applying a
template file to an NVR that is already
configured, the settings on the NVR will update with the
settings saved in the template file. If there are camera configuration settings in the template to be
imported, the relevant cameras must be connected to the NVR.
Procedure 19-4
Importing a Template File
Step Action
1 Select System from the main menu.
2 Select
Templates.
The Save Template page opens.
3 Sele
ct the Load Template tab.
The Load Template page opens.
4 Sele
ct the Import Template tab.
5 Click
Browse.
6 Nav
igate to the template file you want to import.
7 Sele
ct the file and click Open.
The filepath of the template file appears in the T
emplate File field.
8 Click
Apply Template.
If any errors occur during the template import process, a summary of the errors
are displayed.
- End -
Comments to this Manuals