American Dynamics VideoEdge User Manual download pdf (Page 214)

Archiving

198 VideoEdge NVR 4.4 Installation and User Manual

2 Select Archives.

The Archives page opens.

3 Select

the checkbox in the Archives Table for the destination you want to disable.

4 Click Dis

able Archive(s).

- End -

Global Settings

Global settings are available on the Settings page of the Archives menu. Global settings allow you

to quickly enable/disable automatic archiving, the active Archive Destination and FIFO archive

culling.

Note

FIFO (First In, First Out) archive culling is a basic form or data culling which will cull data based on

the date it was written to the archive, i.e. the oldest data is culled. Archive culling can also be

configured based on retention rules, for further information refer to

Procedure 17-19 Enabling the

Maximum Archiving Retention Period on page 209.

You can also configure a retry count and retry interval which dictates the NVR’s behavior should

chiving be unsuccessful due to a loss of connection with the archive, the archive becoming

unreadable, or the destination being full and culling is disabled.

For example if a retry count of 2 is applied with 30 minute intervals, when t

he NVR attempts to

archive the clip and a failure to write occurs the system will wait 30 minutes and then re-attempt to

write the data. After the second failure to write the system will not try again. In this instance you will

have to manually archive the data.

Figure 17-3 Global Settings

Procedure 17-8 

Applying System Wide Settings

Step Action

1 Select Archive from the main menu.

2 Select Set

tings.

The Global Settings page opens.

3 Click the Enabled op

tion button to enable Automatic Archiving.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 214