American Dynamics VideoEdge User Manual download pdf (Page 138)

Motion Detection

122 VideoEdge NVR 4.4 Installation and User Manual

5 If required you can update the Current Record Status. For Motion Detection to be

enabled you must select either Only Record on Alarm or Recording Always with Alarm

On, refer to Table 8-1 Recording Statuses on page 107 for further information.

6 Enter

an a

larm Name (max 50 characters).

Note

Use a descriptive name that will make the alarm easy to identify.

7 Ensure Motion is the selected Type.

Note

If the Motion is not available in the dropdown list, you do not have Motion

Detection enabled on the camera, instead Video Intelligence is enabled. Enable

Motion Detection to continue, refer to

Procedure 9-1 Enabling Motion Detection

for a Camera.

8 (Optional) Use the drawing tools to draw the Motio

n Detection region of interest in the

Camera Alarm Configuration drawing window. Refer to Table 9-2 for information on how to

use the drawing tools.

Note

If you do not draw a region of interest, the entire camera view will be used as the

region of interest.

Figure 9-3 Camera Alarm Configuration Drawing Window

9 Select the Yes option button for the Enabled field, to enable the alarm.

10 Use the Si

ze (%) slider to determine the percentage of the region of interest with activity

present for the alarm to be triggered. The higher the percentage of the region of interest

selected, the lower the number of motion detection results triggered for the alarm. A

setting of 0% will trigger an alarm for any size motion.

11 Enter the Durat

on (secs) that there is sustained activity in the region of interest before

the alarm is triggered. You can enter values between 0 (default) and 600. A value of 0

seconds will trigger an alarm for motion of any duration.

12 Sele

ct the Dir

ection from the dropdown list that the center of the activity area of motion

must move, in order to trigger the alarm. If you select ANY it will trigger an alarm for

movement in any direction.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 138