American Dynamics VideoEdge User Manual download pdf (Page 190)

Network Settings

174 VideoEdge NVR 4.4 Installation and User Manual

Confirmation messages display.

- End -

Default Gateway

In the General Network settings you can edit the IP Address of the Default Gateway. The default

gateway must be set manually if the NVR is not using a DHCP server. The default gateway allows

the NVR to have connectivity with IP addresses beyond the directly connected subnets of its own

NICs.

Procedure 16-2 

Editing the Default Gateway

Step Action

1 Select Network.

2 Select

General.

The General Network settings page opens.

3 T

o edit the Default Gateway select the current value. Update the Default Gateway as

required.

The field background changes to yellow indicating a change has been made.

4 Click

Save. A warning dialog will display stating ‘Changing the default gateway may result

in your NVR becoming inaccessible. If this happens, you will need to physically connect to

the NVR to re-enable network access. Are you sure you want to proceed?’.

5 Click

OK.

A confirmation message displays.

- End -

RTSP Port

If you need to modify the default RTSP Streaming Port for your NVR to conform to your network

rules, you can use the RTSP Streaming Port field on the General Settings page to change the port

setting.

Procedure 16-3 

Editing the RTSP Port

Step Action

1 Select Network.

2 Select

General.

The General Network settings page opens.

3 T

o edit the RTSP Port select the current value. Update the RTSP Port as required.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 190