Network Settings
188 VideoEdge NVR 4.4 Installation and User Manual
3 Click the Traffic Smoothing Only option button.
The area behind the option buttons changes to yellow indicating a change has been
made
.
The Traffic Smoothing fields display.
Figure 16-8 Traffic Smoothing Fields
4 To edit the Client and Stream fields select the current values. Update the Client and
Stream values as required.
The field backgrounds change to yellow indicating a change has been made.
5 Click Save.
Co
nfirmation messages display.
- End -
Preserve Framerate
Any overloaded network or set caps on the NVR/client will allow the NVR to adapt the streams
accordingly by reducing the bitrate by transcoding a stream to H.264, lower bitrate and possibly
lower resolution. If all transcode resources are used, best effort streaming will occur.
Procedure 16-17
Selecting Preserve Framerate
Step Action
1 Select Network.
2 Select Dynamic Bandwid
th.
The Dynamic Bandwidth page opens.
3 Click the Pre
serve Framerate option button.
The area behind the option buttons changes to yellow indicating a change has been
made
.
The Traffic Smoothing fields display.The LAN and WAN Bitrate Cap dropdowns display.
The Transcode Limit Dropdown displays.
Comments to this Manuals