American Dynamics VideoEdge User Manual download pdf (Page 134)

Motion Detection

118 VideoEdge NVR 4.4 Installation and User Manual

8 To create a Motion Detection alarm, refer to Procedure 9-3 Creating a Motion Detection

Camera Alarm on page 121.

- End -

Disabling Motion Detection

When required, you can disable Motion Detection in the Video List or using the camera’s

Advanced Edit page. When Motion Detection is disabled you will not be able to perform some of

the Motion Detection based activities, such as setting NVR Motion Detection alarms.

Procedure 9-2 

Disabling Motion Detection for a Camera

Step Action

1 Select Cameras from the main menu.

2 Select List.

3 Click Setup

in the camera record where you want to disable camera Video

Intelligence.

The Function & Streams page opens.

4 Select None

from the Video Analysis drop-down list.

5 Click Apply.

- End -

Motion Detection Alarms

After enabling Motion Detection on a camera, you can set alarm rules that trigger an event.

Each camera can have up to 10 independent motion alarm rules defined. Each rule has an

sociated region of interest. In each region of interest you can define the areas in the cameras

view that you want to monitor. You can name each alarm rule. It is best to use descriptive names

like ‘Back Door’ or ‘Conference Room’, as these names make it easier to identify the alarm when

using a client rather than an abstract name.

The areas that you want to monitor in a camera

s view are

configured in the Camera Alarm

Configuration drawing window, a live display of the camera view. To determine the areas of the

camera view that you want monitored you need to draw on the window. Use the drawing tools to

draw on the Camera Alarm Configuration window.

The status of each Video Intelligence alarm highlighted in the St

tus field. There are three alarm

states:

• Red - Alarm is disabled. The alarm can be disabled via the Enabled op

tion button.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 134