American Dynamics VideoEdge User Manual download pdf (Page 85)

Configuring Storage

Creating Storage Sets

You can create a new storage set to group particular media folders and cameras. When a new

storage set is created it contains no media folders or cameras, you need to reassign these from

another storage set.

Storage Set Recommendations

• If you are using RAID storage systems, American Dynamics strongly recommends assigning all

virtual disks from a disk group to the same storage set.

• It is recommended that a storage set should conta

in a minimal number of media folders, one if

possible, maximizing the virtual disk size.

• The R710 bundled server storage set performance supports a maximum of 32 cameras with

00Mbps max on each storage set. Total input into server is 400Mbps.

• The R720 bundled server storage set performance supports a maximum of 64 cameras with

00Mbps max on each storage set. Total input into server is 400Mbps.

• The Software Only option installed on the minim

um requirement hardware supports a maximum

of 32 cameras with 100Mbps max on each storage set. Total input into server is 400Mbps.

Procedure 5-5 

Creating a Storage Set

Step Action

1 Select the Storage menu.

2 Select Advanced.

The Advanced Storage Configuration page opens (Figure 5-2).

3 Click

Add Storage Set.

A new storage set is created.

- End -

Media Folder Assignment for Storage Sets

When you create a new storage set you need to assign media folders and cameras to it. To assign

media folders to a new storage set you need to reassign media folders from the default storage set

or an existing storage set.

There is no limit to the number of media folders you can assign to a storage set. There are

wever some restrictions:

• You are able to add a system disk to a storage set by spec

ifying a particular folder on the system

disk. It is recommended that the folder you specify exists on a separate partition on the system

disk.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 85