American Dynamics VideoEdge User Manual download pdf (Page 205)

Network Settings

189

Figure 16-9 Traffic Smoothing,

WAN and LAN Bitrate Caps and Transcode Limit

4 To edit the Client and Stream fields select the current values. Update the Client and

Stream values as required.

The field backgrounds change to yellow indicating a change has been made.

5 The WAN and LAN Bitrate Caps can be set to either a predefined value from the

ropdown menus or alternatively a custom value can be entered in the field.

To use a predefined value open the dropdown, select the desired predefined value from

the list.

a To use a custom value, select Custom

from the dropdown.

The custom entry field displays.

b To edit the bit

rate cap value select the current value. Update the bitrate cap value as

required.

The field backgrounds change to yellow indicating a change has been made.

Note

The custom value must be entered in kbps. For example to enter a value of

5.5Mbps you would type a value of 5500.

6 (Optional) Select the Throttle traffic to local (LAN) clients to apply bandwidth throttling

to devices sharing the same local network.

7 From the T

ranscode Limit dropdown select the number of streams desired.

8 Click Save.

nfirmation messages display.

- End -

Preserve Resolution

Any overloaded network or set caps on the NVR/client will allow the NVR to adapt the streams

accordingly by reducing the stream output using framedrop. If framedrop should fail or doesn’t

occur, then best effort streaming will occur.

Procedure 16-18 

Selecting Preserve Resolution

Step Action

1 Select Network.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 373 374

No comments

American Dynamics VideoEdge User Manual Page 205