Network Settings
178 VideoEdge NVR 4.4 Installation and User Manual
8 Click OK.
- End -
Procedure 16-7
Disabling NIC’s
Step Action
1 Select Network.
2 Select
LAN Interface.
The LAN Interface page opens.
3 Sele
ct the dropdown arrow next to the LAN Interface you wish to edit.
4 Select
Edit.
5 Sele
ct the IP Address Allocation dropdown.
6 Select
NONE.
When NO
NE is selected the LAN Interface options for that NIC will collapse leaving only
the IP Address Allocation displayed.
7 Click
Save.
A dialog box displays advising that changing network interface settings may result in your
NVR
becoming inaccessible.
8 Click
OK.
If you disable eth0 using the NVR Administration Interface it will terminate its
connection on that NIC. To re-establish connection you can access the
Administration Interface using the IP Address of one of the other active NIC’s.
Alternatively you can log into the NVR’s Linux OS to edit the network settings,
refer to Appendix D: NVR Troubleshooting on page 317.
- End -
Procedure 16-8
Editing the LAN Interface Values
Step Action
1 Select Network.
2 Select
LAN Interface.
The LAN Interface page opens.
3 Sele
ct the dropdown arrow next to the LAN Interface you wish to edit.
4 Select
Edit.
Comments to this Manuals